The Bosch Compatible Inline Fridge Filter is perfect for anyone with a Bosch fridge that uses an external inline filter. The John Guest fittings make replacement a snap, and the carbon filter media produces pristine water that tastes great and is free from foul odor. Add one to your basket and realize the benefits of a new filter today!
Fits all previous and current Bosch Fridges which require an externally fitted fridge water filter
Tagline
1/4" John Guest Fittings
When to Change
Installation and replacement procedure for the Bosch Compatible Inline fridge water filter:
Turn off the cold water supply.
Remove the tubing from the ends of the old filter. Note: Take precautions as water will drain from the filter and pipes.
Discard the old water filter.
Align the new water filter with the water flow direction.
Insert tube into the end of the filter that the flow arrow points until the tube stop.
After inserting tube, put together the clip strongly.
Repeat on the other end of the filter.
Turn on the water supply.
Use the fridge dispenser to ensure that any air pockets are removed.
Check for any leaks.
Please refer to our FAQs on how to reset the "change filter" indicator light for a particular fridge manufacturer.
When to change a filter: The filter cartridge should be replaced when the filter light comes on, or every 6 months, or if you notice a decrease in flow of water.
Important: It is essential that operation, maintenance and filter replacement be carried out in accordance with manufacture's recommended procedures and guidelines for this product to perform as advertised. Failure to do so may void warranty.
Contaminants / Specs
The Bosch inline compatible water filter reduces the following health related contaminants:
Chlorine Taste and Odour
Particulate (Class III)
Sediments
Dirt
Rust
Note: The filter produces better tasting water and ice.
Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
English
Ireland
