Samsung DA2910105J Compatible Fridge Water Filter

Here’s a quick installation and replacement guide for the Samsung DA29-10105J Compatible Fridge Water Filter:

• Turn off the cold water supply
• Remove the old cartridge from the system and discard it
• Line up the new water filter with the water flow direction
• Firmly push the inlet and outlet tubing onto the correct ends of the filter to connect them — there should be a tight seal
• Insert the filter clip
• Turn the water supply back on
• Run water through the dispenser for 5 minutes to purge the system
• Check the filter area for leaks
• Press and hold the ice type and child lock (or moisture control) buttons at the same time for 3 seconds — this will reset the filter indicator light, turning it green

Need more guidance on changing your replacement water filter? Take a look at our Samsung filter replacement guide.

When to change a filter: The replacement indicator light on the temperature control panel tells you when you need to change your water filter cartridge. As soon as the indicator light turns red, you should replace the filter. We also advise replacing the filter once every six months, regardless of the colour of the indicator light, as well as whenever you notice a decrease in the flow of water or production of ice.

Important: It is essential that operation, maintenance and filter replacement be carried out in accordance with manufacturer's recommended procedures and guidelines for this product to perform as advertised. Failure to do this may void the warranty.

The DA29-10105J Compatible Water Filter lowers the following health related contaminants:

• Chlorine taste and odour

Note: The water filter produces noticeably cleaner, better tasting and healthier drinking water and ice as soon as you start using it.

Important: Never use the water filter with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.